4.6. Payload Keywords¶
Payload keywords inspect the content of the payload of a packet or stream.
The content keyword is very important in signatures. Between the quotation marks you can write on what you would like the signature to match. The most simple format of content is:
It is possible to use several contents in a signature.
Contents match on bytes. There are 256 different values of a byte
(0-255). You can match on all characters; from a till z, upper case
and lower case and also on all special signs. But not all of the bytes
are printable characters. For these bytes heximal notations are
used. Many programming languages use 0x00 as a notation, where 0x
means it concerns a binary value, however the rule language uses
|00| as a notation. This kind of notation can also be used for
|61| is a |61 61| is aa |41| is A |21| is ! |0D| is carriage return |0A| is line feed
There are characters you can not use in the content because they are already important in the signature. For matching on these characters you should use the heximal notation. These are:
“ |22| ; |3B| : |3A| | |7C|
It is a convention to write the heximal notation in upper case characters.
To write for instance
http:// in the content of a signature, you
should write it like this:
content: “http|3A|//”; If you use a
heximal notation in a signature, make sure you always place it between
pipes. Otherwise the notation will be taken literally as part of the
A few examples:
content:“a|0D|bc”; content:”|61 0D 62 63|"; content:”a|0D|b|63|”;
It is possible to let a signature check the whole payload for a match with the content or to let it check specific parts of the payload. We come to that later. If you add nothing special to the signature, it will try to find a match in all the bytes of the payload.
By default the pattern-matching is case sensitive. The content has to be accurate, otherwise there will not be a match.
It is possible to use the ! for exceptions in contents as well.
alert http $HOME_NET any -> $EXTERNAL_NET any (msg:"Outdated Firefox on Windows"; content:"User-Agent|3A| Mozilla/5.0 |28|Windows|3B| "; content:"Firefox/3."; distance:0; content:!"Firefox/3.6.13"; distance:-10; sid:9000000; rev:1;)
content:!”Firefox/3.6.13”;. This means an alert will be
generated if the used version of Firefox is not 3.6.13.
The following characters must be escaped inside the content:
If you do not want to make a distinction between uppercase and lowercase characters, you can use nocase. The keyword nocase is a content modifier.
The format of this keyword is:
You have to place it after the content you want to modify, like:
content: “abc”; nocase;
It has no influence on other contents in the signature.
The depth keyword is a absolute content modifier. It comes after the content. The depth content modifier comes with a mandatory numeric value, like:
The number after depth designates how many bytes from the beginning of the payload will be checked.
startswith keyword is similar to
depth. It takes no arguments
and must follow a
content keyword. It modifies the
content to match
exactly at the start of a buffer.
startswith is a short hand notation for:
content:"GET|20|"; depth:4; offset:0;
startswith cannot be mixed with
distance for the same pattern.
The offset keyword designates from which byte in the payload will be checked to find a match. For instance offset:3; checks the fourth byte and further.
The keywords offset and depth can be combined and are often used together.
content:“def”; offset:3; depth:3;
If this was used in a signature, it would check the payload from the third byte till the sixth byte.
The keyword distance is a relative content modifier. This means it indicates a relation between this content keyword and the content preceding it. Distance has its influence after the preceding match. The keyword distance comes with a mandatory numeric value. The value you give distance, determines the byte in the payload from which will be checked for a match relative to the previous match. Distance only determines where Suricata will start looking for a pattern. So, distance:5; means the pattern can be anywhere after the previous match + 5 bytes. For limiting how far after the last match Suricata needs to look, use ‘within’.
Examples of distance:
Distance can also be a negative number. It can be used to check for matches with partly the same content (see example) or for a content even completely before it. This is not very often used though. It is possible to attain the same results with other keywords.
The keyword within is relative to the preceding match. The keyword within comes with a mandatory numeric value. Using within makes sure there will only be a match if the content matches with the payload within the set amount of bytes. Within can not be 0 (zero)
Example of matching with within:
The second content has to fall/come ‘within 3 ‘ from the first content.
As mentioned before, distance and within can be very well combined in a signature. If you want Suricata to check a specific part of the payload for a match, use within.
The purpose of the isdataat keyword is to look if there is still data at a specific part of the payload. The keyword starts with a number (the position) and then optional followed by ‘relative’ separated by a comma and the option rawbytes. You use the word ‘relative’ to know if there is still data at a specific part of the payload relative to the last match.
So you can use both examples:
isdataat:512; isdataat:50, relative;
The first example illustrates a signature which searches for byte 512 of the payload. The second example illustrates a signature searching for byte 50 after the last match.
You can also use the negation (!) before isdataat.
With the dsize keyword, you can match on the size of the packet payload. You can use the keyword for example to look for abnormal sizes of payloads. This may be convenient in detecting buffer overflows.
example of dsize in a rule:
The rpc keyword can be used to match in the SUNRPC CALL on the RPC procedure numbers and the RPC version.
You can modify the keyword by using a wild-card, defined with * With this wild-card you can match on all version and/or procedure numbers.
RPC (Remote Procedure Call) is an application that allows a computer program to execute a procedure on another computer (or address space). It is used for inter-process communication. See http://en.wikipedia.org/wiki/Inter-process_communication
rpc:<application number>, [<version number>|*], [<procedure number>|*]>;
Example of the rpc keyword in a rule:
The replace content modifier can only be used in ips. It adjusts network traffic. It changes the content it follows (‘abc’) into another (‘def’), see example:
The replace modifier has to contain as many characters as the content it replaces. It can only be used with individual packets. It will not work for Normalized Buffers like HTTP uri or a content match in the reassembled stream.
The checksums will be recalculated by Suricata and changed after the replace keyword is being used.
4.6.12. pcre (Perl Compatible Regular Expressions)¶
The keyword pcre matches specific on regular expressions. More information about regular expressions can be found here http://en.wikipedia.org/wiki/Regular_expression.
The complexity of pcre comes with a high price though: it has a negative influence on performance. So, to mitigate Suricata from having to check pcre often, pcre is mostly combined with ‘content’. In that case, the content has to match first, before pcre will be checked.
Format of pcre:
Example of pcre. In this example there will be a match if the payload contains six numbers following:
Example of pcre in a signature:
There are a few qualities of pcre which can be modified:
- By default pcre is case-sensitive.
- The . (dot) is a part of regex. It matches on every byte except for newline characters.
- By default the payload will be inspected as one line.
These qualities can be modified with the following characters:
i pcre is case insensitive s pcre does check newline characters m can make one line (of the payload) count as two lines
These options are perl compatible modifiers. To use these modifiers, you should add them to pcre, behind regex. Like this:
Pcre compatible modifiers
There are a few pcre compatible modifiers which can change the qualities of pcre as well. These are:
A: A pattern has to match at the beginning of a buffer. (In pcre ^ is similar to A.)
E: Ignores newline characters at the end of the buffer/payload.
G: Inverts the greediness.
The following characters must be escaped inside the content:
22.214.171.124. Suricata’s modifiers¶
Suricata has its own specific pcre modifiers. These are:
R: Match relative to the last pattern match. It is similar to distance:0;
U: Makes pcre match on the normalized uri. It matches on the uri_buffer just like uricontent and content combined with http_uri.U can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-uri buffer. Read more about HTTP URI Normalization.
I: Makes pcre match on the HTTP-raw-uri. It matches on the same buffer as http_raw_uri. I can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-raw-uri buffer. Read more about HTTP URI Normalization.
P: Makes pcre match on the HTTP- request-body. So, it matches on the same buffer as http_client_body. P can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-request body.
Q: Makes pcre match on the HTTP- response-body. So, it matches on the same buffer as http_server_body. Q can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-response body.
H: Makes pcre match on the HTTP-header. H can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-header body.
D: Makes pcre match on the unnormalized header. So, it matches on the same buffer as http_raw_header. D can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-raw-header.
M: Makes pcre match on the request-method. So, it matches on the same buffer as http_method. M can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-method buffer.
C: Makes pcre match on the HTTP-cookie. So, it matches on the same buffer as http_cookie. C can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-cookie buffer.
S: Makes pcre match on the HTTP-stat-code. So, it matches on the same buffer as http_stat_code. S can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-stat-code buffer.
Y: Makes pcre match on the HTTP-stat-msg. So, it matches on the same buffer as http_stat_msg. Y can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-stat-msg buffer.
B: You can encounter B in signatures but this is just for compatibility. So, Suricata does not use B but supports it so it does not cause errors.
O: Overrides the configures pcre match limit.
V: Makes pcre match on the HTTP-User-Agent. So, it matches on the same buffer as http_user_agent. V can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-User-Agent buffer.
W: Makes pcre match on the HTTP-Host. So, it matches on the same buffer as http_host. W can be combined with /R. Note that R is relative to the previous match so both matches have to be in the HTTP-Host buffer.