7.7. Ignoring Traffic¶
In some cases there are reasons to ignore certain traffic. Certain hosts may be trusted, or perhaps a backup stream should be ignored.
This document lists some strategies for ignoring traffic.
7.7.1. capture filters (BPF)¶
Through BPFs the capture methods pcap, af-packet and pf_ring can be told what to send to Suricata, and what not. For example a simple filter ‘tcp’ will only send tcp packets.
If some hosts and or nets need to be ignored, use something like “not (host IP1 or IP2 or IP3 or net NET/24)”.
not host 18.104.22.168
Capture filters are specified on the commandline after all other options:
suricata -i eth0 -v not host 22.214.171.124 suricata -i eno1 -c suricata.yaml tcp or udp
Capture filters can be set per interface in the pcap, af-packet, netmap and pf_ring sections. It can also be put in a file:
echo "not host 126.96.36.199" > capture-filter.bpf suricata -i ens5f0 -F capture-filter.bpf
Using a capture filter limits what traffic Suricata processes. So the traffic not seen by Suricata will not be inspected, logged or otherwise recorded.
7.7.2. pass rules¶
Pass rules are Suricata rules that if matching, pass the packet and in case of TCP the rest of the flow. They look like normal rules, except that instead of ‘alert’ or ‘drop’ they start with ‘pass’.
pass ip 188.8.131.52 any <> any any (msg:"pass all traffic from/to 184.108.40.206"; sid:1;)
A big difference with capture filters is that logs such as Eve or http.log are still generated for this traffic.
Suppress rules can be used to make sure no alerts are generated for a host. This is not efficient however, as the suppression is only considered post-matching. In other words, Suricata first inspects a rule, and only then will it consider per-host suppressions.
suppress gen_id 0, sig_id 0, track by_src, ip 220.127.116.11